* Known Harpoon [ANW] Issues

Discuss Harpoon3 and ANW

* Known Harpoon [ANW] Issues

Postby Herman Hum » Sat Feb 14, 2009 9:53 pm

Cannot change missile target in MP

Game will allow re-targeting of missile in SP, but not in MP

1. Run [PDb] Cannot change missile target (3.9.4).scn in GE in SP
2. Fire one AS-6 at either ship and activate missile radar
3. Missile will plot intercept course
4. Select missile and order it to attack the other ship target with F1
5. Missile will re-plot path to intercept second target in SP
6. This is not possible if the scenario is run in MP from a server. Game will ignore re-targeting of missile and remain locked onto first target.
Attachments
[PDb] Cannot change missile target (3.9.4).zip
(39.05 KiB) Downloaded 1864 times
ScenShare Guidelines:

1) Enjoy creating it
2) Enjoy playing it
3) Enjoy sharing it
4) Enjoy helping others create them

The PlayersDB - The Harpoon Community's #1 Choice.

Harpoon3 Frequently Asked Questions
Herman Hum
Captain
Captain
 
Posts: 1318
Joined: Wed Oct 25, 2006 1:32 am

* Known Harpoon [ANW] Issues

Postby Herman Hum » Sat Feb 14, 2009 9:55 pm

Centre key [T] inconsistency

When switching between a Map window with Unit Display enabled to a window with Group Display toggled, the user will not be able to centre on the position of the unit selected because the Unit Display has not been toggled for that window

1. Run [PDb] Centre key [T] inconsistency (3.9.3).scn in GE or SE
2. Click and select any unit in the Unit Window
3. Click on Group Window
4. Depress Centre hotkey [T]
5. Group Window will not centre on the position of the unit selected because the Unit Display has not been toggled for that window
6. In H3, the Window would still centre on the position of the individual unit selected even though the window had Display Groups enabled
Attachments
[PDb] Centre key [T] inconsistency (3.9.4).zip
(49.43 KiB) Downloaded 2028 times
[PDb] Centre key [T] inconsistency (3.9.4).gif
[PDb] Centre key [T] inconsistency (3.9.4).gif (11 KiB) Viewed 50357 times
ScenShare Guidelines:

1) Enjoy creating it
2) Enjoy playing it
3) Enjoy sharing it
4) Enjoy helping others create them

The PlayersDB - The Harpoon Community's #1 Choice.

Harpoon3 Frequently Asked Questions
Herman Hum
Captain
Captain
 
Posts: 1318
Joined: Wed Oct 25, 2006 1:32 am

* Known Harpoon [ANW] Issues

Postby Herman Hum » Sat Feb 14, 2009 10:03 pm

CTD on load

CTD while attempting to load saved game

1. Attempt to load [PDb] CTD on load (3.9.4).sav in GE with PlayersDB Aug 1, 2008
2. Game runs in 3.9.3
Attachments
[PDb] CTD on load (3.9.4).zip
(888.72 KiB) Downloaded 2028 times
ScenShare Guidelines:

1) Enjoy creating it
2) Enjoy playing it
3) Enjoy sharing it
4) Enjoy helping others create them

The PlayersDB - The Harpoon Community's #1 Choice.

Harpoon3 Frequently Asked Questions
Herman Hum
Captain
Captain
 
Posts: 1318
Joined: Wed Oct 25, 2006 1:32 am

* Known Harpoon [ANW] Issues

Postby Herman Hum » Sat Feb 14, 2009 10:10 pm

CTD on load II

CTD while attempting to load saved game II

1. Attempt to load [PDb] CTD on load II (3.9.4).sav in GE with PlayersDB Jan 2, 2009
Attachments
[PDb] CTD on load II (3.9.4).zip
(828.12 KiB) Downloaded 2137 times
ScenShare Guidelines:

1) Enjoy creating it
2) Enjoy playing it
3) Enjoy sharing it
4) Enjoy helping others create them

The PlayersDB - The Harpoon Community's #1 Choice.

Harpoon3 Frequently Asked Questions
Herman Hum
Captain
Captain
 
Posts: 1318
Joined: Wed Oct 25, 2006 1:32 am

* Known Harpoon [ANW] Issues

Postby Herman Hum » Sat Feb 14, 2009 10:11 pm

ECM turns itself off in MP

Prowlers on Plotted mission with active ECM will turn itself off in MP when plotted path is reached (Originally reported by Jeronimo Chiecchio)

1. Run [PDb] ECM turns itself off in MP (3.9.4).scn from MP server
2. Launch Prowler
3. Activate ECM for Prowler
4. Plot path for Prowler
5. When plane reaches end of plotted path, ECM returns to passive state
Attachments
[PDb] ECM turns itself off in MP (3.9.4).zip
(8.55 KiB) Downloaded 1880 times
ScenShare Guidelines:

1) Enjoy creating it
2) Enjoy playing it
3) Enjoy sharing it
4) Enjoy helping others create them

The PlayersDB - The Harpoon Community's #1 Choice.

Harpoon3 Frequently Asked Questions
Herman Hum
Captain
Captain
 
Posts: 1318
Joined: Wed Oct 25, 2006 1:32 am

* Known Harpoon [ANW] Issues

Postby Herman Hum » Sat Feb 14, 2009 10:13 pm

Ferry mission to comm centre

Ferry mission lands at comm centre and not hangar or runway (Originally reported by Freek Schepers)

1. Run [PDb] Ferry mission to comm centre (3.9.4).scn in SE
2. Ferry flight will land at Port Stanley C3I comm centre.
Attachments
[PDb] Ferry mission to comm centre (3.9.4).zip
(153.62 KiB) Downloaded 1984 times
ScenShare Guidelines:

1) Enjoy creating it
2) Enjoy playing it
3) Enjoy sharing it
4) Enjoy helping others create them

The PlayersDB - The Harpoon Community's #1 Choice.

Harpoon3 Frequently Asked Questions
Herman Hum
Captain
Captain
 
Posts: 1318
Joined: Wed Oct 25, 2006 1:32 am

* Known Harpoon [ANW] Issues

Postby Herman Hum » Sat Feb 14, 2009 10:14 pm

File-Save uses original scenario name

Once a saved game name was used, the File Save command should have simply used it and overwritten the previous saved game file. Instead, a new Saved game file is created using the original *.SCN name as a prefix and *.SAV suffix. (Originally reported by Morphin)

1. Load any scenario file in GE (SE works properly)
2. Order File >> Save As command
3. Save As dialogue window appears
4. Save game under any name
5. Order File >> Save command
6. New saved game file is created with using the original scenario name as a prefix and *.SAV as a suffix
Attachments
[PDb] File-Save uses original scenario name (3.9.4).zip
(555 Bytes) Downloaded 2086 times
ScenShare Guidelines:

1) Enjoy creating it
2) Enjoy playing it
3) Enjoy sharing it
4) Enjoy helping others create them

The PlayersDB - The Harpoon Community's #1 Choice.

Harpoon3 Frequently Asked Questions
Herman Hum
Captain
Captain
 
Posts: 1318
Joined: Wed Oct 25, 2006 1:32 am

* Known Harpoon [ANW] Issues

Postby Herman Hum » Sat Feb 14, 2009 10:15 pm

Ghost sessions in MP II

Ghost sessions in MP continue to run after all players have left the session. This ties up processing power as the sessions do not usually expire on their own.

1. Setup MP server in a reduced window with LoneWolf.scn
2. Create session
3. Select Lone Wolf from Stand-alone battleset
4. Scenario fails to load fully
5. Select quit
6. Log back onto server lobby to see that Ghost session remains
Attachments
[PDb] Ghost sessions in MP II (3.9.4).zip
(478 Bytes) Downloaded 1970 times
ScenShare Guidelines:

1) Enjoy creating it
2) Enjoy playing it
3) Enjoy sharing it
4) Enjoy helping others create them

The PlayersDB - The Harpoon Community's #1 Choice.

Harpoon3 Frequently Asked Questions
Herman Hum
Captain
Captain
 
Posts: 1318
Joined: Wed Oct 25, 2006 1:32 am

* Known Harpoon [ANW] Issues

Postby Herman Hum » Sat Feb 14, 2009 10:24 pm

Fueling operations limited in number

Plane will not begin to re-fuel until other previously ordered operations are complete

1. Run [PDb] Fueling operations limited in number (3.9.4).SAV in GE with PlayersDB Aug 1, 2008 at 1:1 compression
2. Order Vulcan bomber B066 to receive fuel from Tanker T065
3. Vulcan will not begin to re-fuel until other previously ordered operations are complete
Attachments
[PDb] Fueling operations limited in number (3.9.4).zip
(889.14 KiB) Downloaded 2098 times
ScenShare Guidelines:

1) Enjoy creating it
2) Enjoy playing it
3) Enjoy sharing it
4) Enjoy helping others create them

The PlayersDB - The Harpoon Community's #1 Choice.

Harpoon3 Frequently Asked Questions
Herman Hum
Captain
Captain
 
Posts: 1318
Joined: Wed Oct 25, 2006 1:32 am

* Known Harpoon [ANW] Issues

Postby Herman Hum » Sat Feb 14, 2009 10:25 pm

Generic strikes seek additional targets 3

Bombers will strike N, then S, then W and hang there

1. Run [PDb] Generic strikes seek additional targets 3 (3.9.4).SCN in GE
2. Bombers will strike N, then S, then W and hang there. Some will go East to attack target, but most will just loiter even though mission states that they attacking final target
Attachments
[PDb] Generic strikes seek additional targets 3 (3.9.4).zip
(26.33 KiB) Downloaded 2060 times
ScenShare Guidelines:

1) Enjoy creating it
2) Enjoy playing it
3) Enjoy sharing it
4) Enjoy helping others create them

The PlayersDB - The Harpoon Community's #1 Choice.

Harpoon3 Frequently Asked Questions
Herman Hum
Captain
Captain
 
Posts: 1318
Joined: Wed Oct 25, 2006 1:32 am

* Known Harpoon [ANW] Issues

Postby Herman Hum » Sat Feb 14, 2009 10:27 pm

Ground strike fails to execute

Ground strike fails to execute with 3.9.4 but has no problem firing in 3.9.3

1. Load [PDb] Ground strike fails to execute (3.9.4).scn in SE
2. Activate Show All
3. Ekranoplan from Gorner side will not close to launch nuke missiles at target with 3.9.4
4. Mission executes successfully in 3.9.3
Attachments
[PDb] Ground strike fails to execute (3.9.4).zip
(72.6 KiB) Downloaded 1996 times
ScenShare Guidelines:

1) Enjoy creating it
2) Enjoy playing it
3) Enjoy sharing it
4) Enjoy helping others create them

The PlayersDB - The Harpoon Community's #1 Choice.

Harpoon3 Frequently Asked Questions
Herman Hum
Captain
Captain
 
Posts: 1318
Joined: Wed Oct 25, 2006 1:32 am

* Known Harpoon [ANW] Issues

Postby Herman Hum » Sat Feb 14, 2009 10:29 pm

Group icon moves without ships

Group icon will arrive even though all ship components are trapped by ice

1. Run [PDb] Group icon moves without ships (3.9.3).scn in GE
2. Plot Slava group to RefPt Slava
3. Slava group icon will arrive even though all ship components are trapped by ice
Attachments
[PDb] Group icon moves without ships (3.9.4).zip
(79.17 KiB) Downloaded 1939 times
[PDb] Group icon moves without ships 2 (3.9.4).gif
[PDb] Group icon moves without ships 2 (3.9.4).gif (4.53 KiB) Viewed 50368 times
[PDb] Group icon moves without ships 1 (3.9.4).gif
[PDb] Group icon moves without ships 1 (3.9.4).gif (3.41 KiB) Viewed 50366 times
ScenShare Guidelines:

1) Enjoy creating it
2) Enjoy playing it
3) Enjoy sharing it
4) Enjoy helping others create them

The PlayersDB - The Harpoon Community's #1 Choice.

Harpoon3 Frequently Asked Questions
Herman Hum
Captain
Captain
 
Posts: 1318
Joined: Wed Oct 25, 2006 1:32 am

* Known Harpoon [ANW] Issues

Postby Herman Hum » Sat Feb 14, 2009 10:32 pm

Group plots across ice

Group plots path through ice in ANW and ships subsequently get stuck on the ice

1. Run [PDb] Group plots across ice (3.9.3).scn in GE
2. Plot path for Slava group to Slava RefPt
3. Group plots path around ice in H3
4. Group plots path through ice in ANW and ships subsequently get stuck on the ice
Attachments
[PDb] Group plots across ice (3.9.4).zip
(81.46 KiB) Downloaded 1928 times
[PDb] Group plots across ice 2 (3.9.4).gif
[PDb] Group plots across ice 2 (3.9.4).gif (5.42 KiB) Viewed 50365 times
[PDb] Group plots across ice 1 (3.9.4).gif
[PDb] Group plots across ice 1 (3.9.4).gif (4.8 KiB) Viewed 50369 times
ScenShare Guidelines:

1) Enjoy creating it
2) Enjoy playing it
3) Enjoy sharing it
4) Enjoy helping others create them

The PlayersDB - The Harpoon Community's #1 Choice.

Harpoon3 Frequently Asked Questions
Herman Hum
Captain
Captain
 
Posts: 1318
Joined: Wed Oct 25, 2006 1:32 am

* Known Harpoon [ANW] Issues

Postby Herman Hum » Sat Feb 14, 2009 10:39 pm

Guns will not fire at aircraft

Mission-directed 40mm guns will fire at aircraft but 120mm guns will not unless manually ordered to do so (Originally reported by Freek Schepers)

1. Run [PDb] Guns will not fire at aircraft (3.9.4).scn in GE
2. DD Friesland will fire 40mm guns at aircraft but 120mm guns will not fire. Both guns are rated for a/c. Guns can be fired manually.
Attachments
[PDb] Guns will not fire at aircraft (3.9.4).zip
(773.84 KiB) Downloaded 2139 times
ScenShare Guidelines:

1) Enjoy creating it
2) Enjoy playing it
3) Enjoy sharing it
4) Enjoy helping others create them

The PlayersDB - The Harpoon Community's #1 Choice.

Harpoon3 Frequently Asked Questions
Herman Hum
Captain
Captain
 
Posts: 1318
Joined: Wed Oct 25, 2006 1:32 am

* Known Harpoon [ANW] Issues

Postby Herman Hum » Sat Feb 14, 2009 10:41 pm

Intermittent values rejected

Some intermittent values for EmCon window rejected

1. Run [PDb] Intermittent values rejected (3.9.4).scn in SE
2. Drag+select both ships
3. Hit F9
4. Attempt to set both ships to Intermittent Active sonar value of 50 seconds Active
5. Value will be rejected
Attachments
[PDb] Intermittent values rejected (3.9.4).zip
(37.16 KiB) Downloaded 1897 times
[PDb] Intermittent values rejected (3.9.4).gif
[PDb] Intermittent values rejected (3.9.4).gif (5.63 KiB) Viewed 50369 times
ScenShare Guidelines:

1) Enjoy creating it
2) Enjoy playing it
3) Enjoy sharing it
4) Enjoy helping others create them

The PlayersDB - The Harpoon Community's #1 Choice.

Harpoon3 Frequently Asked Questions
Herman Hum
Captain
Captain
 
Posts: 1318
Joined: Wed Oct 25, 2006 1:32 am

PreviousNext

Return to H3 General discussion

Who is online

Users browsing this forum: No registered users and 21 guests

cron